Received-SPF: none
 receiver=logan.com; client-ip=165.166.0.28; envelope-from=Jewen@Comporium.net
Date: Sun, 11 Sep 2005 23:43:20 -0400
From: Joe Ewen <Jewen@Comporium.net>
Subject: Re: [FlyRotary] Re: Ignition Coil Connectors
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-id: <005401c5b74c$1e4fa220$800101df@engineer1>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7bit
References: <list-718861@logan.com>

Dale,
It looked like the D851 had a slightly small footprint making layout a bit
easier.  The EC-2 manual indicates both will work and I believe somewhwere I
read Tracy was using the D851s on his Renesis.  If I had it to do again, it
would have been the D850 since I now have connectors that will fit 850.
Joe
----- Original Message ----- 
From: "Dale Rogers" <dale.r@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, September 11, 2005 11:33 PM
Subject: [FlyRotary] Re: Ignition Coil Connectors


> Joe,
>
>    Why did you choose the D851?  I thought that the "standard"
> was the D580 (AKA: GM # 12558948).
>
> Dale R.
>
>
> > From: Joe Ewen <Jewen@Comporium.net>
> > Date: 2005/09/11 Sun PM 10:43:17 EDT
> > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> > Subject: [FlyRotary] Ignition Coil Connectors
> >
> > Does anyone know a source and or part number on connectors that will fit
the Delco D851 coils.  I tried the Waytek parts called out on the Wiki, but
they do not fit the D851.
> >
> > Thanks,
> > Joe
> >
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>