|
Message
No there is a half inch thick aluminum plate with 4 "spigots" to attach the
intake runners. They are connect with a short peice of radiator hose and clamps.
See attached picture. My primary injectors are in the original location, but the
secondary rail was lengthened so that the injectors are mounted in the
spigots.
Bernie, hope this helps, I have lots more pictures
================================================
Bernie,
A question on your intake manifold -- is it all
composite, including the flange that attaches to the engine?
Bill Schertz
KIS Cruiser # 4045
MVC-317S.JPG
|