Received-SPF: none
 receiver=logan.com; client-ip=201.225.225.168; envelope-from=rijakits@cwpanama.net
Message-ID: <008c01c5ae8e$378be030$6e5de0c9@usuarioq3efog0>
From: "rijakits" <rijakits@cwpanama.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-688164@logan.com>
Subject: Re: [FlyRotary] Re: eMachineShop.com
Date: Wed, 31 Aug 2005 19:43:29 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I need to check again, BUT so far no joy!

Everything BUT the right sizes for the Toyota Diesel oilfilter....

Thomas J.


----- Original Message ----- 
From: "Bulent Aliev" <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, August 31, 2005 1:15 PM
Subject: [FlyRotary] Re: eMachineShop.com


> Hi Thomas, i don't have a machine shop to do this, but Summitracing  
> has pages and pages of oil filter adapters. I'm using the Perma-Cool  
> one with 4 ports and like it.
> Buly
> On Aug 31, 2005, at 1:53 PM, rijakits wrote:
> 
> > Don't get your hopes up too high.
> >
> > Works well for rather simple pieces, but I tried to get a quote for an
> > oil-filter-adapter (adapter is supposed to fit between the original
> > oil-filter mount and the filter. The adapter feeds the filter with  
> > a line
> > from a remote electric pump - pre-luber from Buly!!)
> > When I finally had it ready they said they don't have the machining
> > capability "at this time" :)
> > This was about 1/2 year ago. I will try again soon!
> >
> > Buly, would you have any shop to do an adapter? Non of the  
> > aftermarket stuff
> > works ( Toyota 4Runner Turbo Diesel). I guess I could get the e- 
> > machineshop
> > drawing printed or converted to somethig another shop could use....
> >
> > Thomas J.
> >
> >
> > ----- Original Message -----
> > From: "John Courte" <stjohn@openbar.com>
> > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> > Sent: Wednesday, August 31, 2005 12:22 PM
> > Subject: [FlyRotary] eMachineShop.com
> >
> >
> >
> >> Saw this on WIRED this morning.  Looks like it could be a big
> >> help to people in need of custom bits and pieces who don't
> >> have ready access to fabrication facilities:
> >>
> >> http://www.emachineshop.com
> >>
> >> You download their software and design your part, then they
> >> manufacture it and send it to you via FedEx.  They can do molding,
> >> milling, turnin, laser cutting, lots of different processes and they
> >> can fabricate out of many different materials.
> >>
> >> the faq page
> >>
> >> http://www.emachineshop.com/faq/general.htm
> >>
> >> is going to be able to explain it better than I can.
> >>
> >> hope this helps somebody.
> >>
> >> thanks,
> >> -stjohn
> >>
> >> --
> >> Homepage:  http://www.flyrotary.com/
> >> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >>
> >
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/