Don't get your hopes up too high.

Works well for rather simple pieces, but I tried to get a quote for an
oil-filter-adapter (adapter is supposed to fit between the original
oil-filter mount and the filter. The adapter feeds the filter with a line
from a remote electric pump - pre-luber from Buly!!)
When I finally had it ready they said they don't have the machining
capability "at this time" :)
This was about 1/2 year ago. I will try again soon!

Buly, would you have any shop to do an adapter? Non of the aftermarket stuff
works ( Toyota 4Runner Turbo Diesel). I guess I could get the e-machineshop
drawing printed or converted to somethig another shop could use....

Thomas J.


----- Original Message -----
From: "John Courte" <stjohn@openbar.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, August 31, 2005 12:22 PM
Subject: [FlyRotary] eMachineShop.com


> Saw this on WIRED this morning.  Looks like it could be a big
> help to people in need of custom bits and pieces who don't
> have ready access to fabrication facilities:
>
> http://www.emachineshop.com
>
> You download their software and design your part, then they
> manufacture it and send it to you via FedEx.  They can do molding,
> milling, turnin, laser cutting, lots of different processes and they
> can fabricate out of many different materials.
>
> the faq page
>
> http://www.emachineshop.com/faq/general.htm
>
> is going to be able to explain it better than I can.
>
> hope this helps somebody.
>
> thanks,
> -stjohn
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/