|
Message
Hey Rusty, If you
have a mixture monitor on the Pig, I'll bet it reads real rich from 1500 to 3000
rpm (or so). Try it leaner. You can use Mode 9 to sneak up on
it. You know what they say, " A lean hog makes better
bacon"
" Hopefully, your
rough engine is as simple as a fouled plug. Is it rough at all speeds? Ok
at idle rough at higher rpm?
"
Ed's
right I was
amazed at how easy it is to foul plugs when the mixture is too rich! If
the plugs look really carbon black, then change them
out.
When all else fails, read the instructions and follow
the steps. There is a lot in there that I did not see until the 10-12th
read.
Regards,
Tommy<><
|