Posted a picture of Richard Sohn's Single Rotor engine and it is way to big.
How can I remove it?  I'll Then post one that is smaller
Bob Perkinson
Hendersonville, TN.
RV9A N658RP Reserved
If nothing changes
Nothing changes




-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Bob White
Sent: Wednesday, June 15, 2005 12:07 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Rotary Wiki


Hi Bob,

I've found that hosting video's takes quit a bit of room for just a few
minutes of video time so haven't made any provisions for it.  You can
always put a link to a video located at another site.

Photos (jpg, gif, png, etc) are OK and can be uploaded by clicking on
the 'Image Galleries' -> 'Upload image' menu items.  Once the photo is
uploaded, the code needed to reference it will be generated.  Cut and
paste it into the wiki page.  It can be put in as either an inline
image, or a reference link.  640 X 480 pixels is a good size to use.
They don't take a lot of room, will fit most everyones screen, and are
large enough to see most details.  There is only one gallery defined
right now but more can be made if needed.

I have about 100 Mbytes alocated for the site right now, with 37 Mbytes
used.  I can increase that as needed.

Bob W.

On Wed, 15 Jun 2005 09:15:56 -0500
"Bob Perkinson" <bobperk@bellsouth.net> wrote:

> Bob W.
> Can we up load AVI's to the Wiki, and if so how big?
>
> Bob Perkinson
> Hendersonville, TN.
> RV9A N658RP Reserved
> If nothing changes
> Nothing changes
>
>
>
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblin-photo.com/cable/

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html