Return-Path: Received: from bewersdorff.com ([192.220.83.90] verified) by logan.com (CommuniGate Pro SMTP 4.1) with SMTP id 2510759 for flyrotary@lancaironline.net; Mon, 04 Aug 2003 04:48:19 -0400 Received: (qmail 63916 invoked by uid 21338); 4 Aug 2003 08:48:19 -0000 Received: from unknown (HELO rapunzel) ([216.101.149.124]) (envelope-sender ) by 192.220.83.90 (qmail-ldap-1.03) with SMTP for ; 4 Aug 2003 08:48:19 -0000 From: "Marko Bewersdorff" To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] Tachs other stuff Date: Mon, 4 Aug 2003 01:47:53 -0700 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0606_01C35A2A.6BC402C0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: Importance: Normal This is a multi-part message in MIME format. ------=_NextPart_000_0606_01C35A2A.6BC402C0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit MessageMy dad showed me how to etch my own circuit boards when I was a kid - piece of cake. draw the to be left electrical traces with a permanent marker onto the raw copper clad circuit board. Then toss that into the iron3 sulf...somthing solution and wait until the exposed copper is dessolved, stirr occasionally. then rinse it off clean with acetone and drill holes for the legs for the components. re Marko -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Haywire cost of having boards made and not sure about the difficulties of making my own, I'm sort of wavering on this idea. My header tank (4.5 usg) has a sight tube, but the inspector hasn't been clear as to whether he S. Todd Bartrim Turbo 13B RV-9Endurance C-FSTB http://www3.telus.net/haywire/RV-9/C-FSTB.htm "Whatever you vividly imagine, Ardently desire, Sincerely believe in, Enthusiastically act upon, Must inevitably come to pass". ------=_NextPart_000_0606_01C35A2A.6BC402C0 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Message
My dad=20 showed me how to etch my own circuit boards when I was a kid - = piece of=20 cake. draw the to be left electrical traces with a permanent marker onto = the raw=20 copper clad circuit board. Then toss that into the iron3 = sulf...somthing=20 solution and wait until the exposed copper is dessolved, stirr=20 occasionally. then rinse it off clean with acetone and drill = holes for=20 the legs for the components. 
 
re
 
Marko
-----Original Message-----
From: Rotary motors in = aircraft=20 [mailto:flyrotary@lancaironline.net]On Behalf Of=20 Haywire
 
 cost of having boards = made and not=20 sure about the difficulties of making my own, I'm sort of wavering on = this=20 idea. My header tank (4.5 usg) has a sight tube, but the inspector = hasn't been=20 clear as to whether he  
 
 S.=20 Todd Bartrim
Turbo 13B RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

=    "Whatever you vividly imagine, Ardently desire, = Sincerely=20 believe in, Enthusiastically act upon, Must inevitably come to pass".=20
 
------=_NextPart_000_0606_01C35A2A.6BC402C0--