X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [199.185.220.223] (HELO priv-edtnes51.telusplanet.net) by logan.com (CommuniGate Pro SMTP 4.3c5) with ESMTP id 951439 for flyrotary@lancaironline.net; Fri, 20 May 2005 16:02:36 -0400 Received-SPF: pass receiver=logan.com; client-ip=199.185.220.223; envelope-from=echolakeresort@telus.net Received: from boucher-oddle24 ([207.194.26.109]) by priv-edtnes51.telusplanet.net (InterMail vM.6.01.04.04 201-2131-118-104-20050224) with ESMTP id <20050520200146.DMUY26803.priv-edtnes51.telusplanet.net@boucher-oddle24> for ; Fri, 20 May 2005 14:01:46 -0600 Received: from 127.0.0.1 (AVG SMTP 7.0.322 [266.11.13]); Fri, 20 May 2005 13:01:42 -0700 Message-Id: <428E4223.000005.02672@BOUCHER-ODDLE24> Date: Fri, 20 May 2005 13:01:39 -0700 (Pacific Standard Time) X-Mailer: IncrediMail (3001609) From: "Echo Lake Fishing Resort (Georges Boucher)" References: To: Subject: Re: [FlyRotary] Case of one? [FlyRotary] Re: Sized 13b X-FID: FLAVOR00-NONE-0000-0000-000000000000 X-Priority: 3 Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=======AVGMAIL-428E42266CE4=======" --=======AVGMAIL-428E42266CE4======= Content-Type: Multipart/Alternative; boundary="------------Boundary-00=_RY0T6RO0000000000000" --------------Boundary-00=_RY0T6RO0000000000000 Content-Type: Text/Plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Guys=0D I was only reporting what Atkins told me. I don't think "plugs up have anything to do with the problem, Venable 's dry sump system must have had the oil tank to low without a check valve in the line & oil the oil in th= e engine & lines drained back to the tank in turn running without oil press= ure for 20 to 30 seconds at each start up (that is what I gavered from the conversation with Atkins) I'm still going plugs up but without a dry sump system (to much weight). =0D Georges B.=0D =0D =0D -------Original Message-------=0D =0D From: Rotary motors in aircraft=0D Date: 05/20/05 11:59:37=0D To: Rotary motors in aircraft=0D Subject: [FlyRotary] Case of one? [FlyRotary] Re: Sized 13b=0D =0D Well, George, appreciate all the engineering accolades you are laying on = me. However considering there have been a number of "Plugs UP" installations= in addition to mine that have never had any problem with lubrication, I thin= k your caution somewhat exaggerated. =0D =0D The "bad" sump was (in my opinion) using a rubber hose on the suction en= d rather than a metal tube. Any air leak at all and you lose your ability = to pull the oil up. If the hose lost stiffness due to heat, it could partial= ly collapse also restricting oil flow. But that apply to the pickups in th= e auto orientation as well. If you have a leak (didn't use a gasket, seala= nt, hole in the pickup tube, stuff stuck on your screen, etc) on the suction side, you are going to have trouble getting oil pressure quickly. =0D =0D Now, I for one would consider it a problem if I couldn't get oil pressur= e within 1-2 seconds of firing up the engine (regardless of orientation) ,= I would cringe thinking of metal on metal rubbing, heating, eroding, etc. = I couldn't stand it and would have to fix it. =0D =0D But, I try to avoid over generalization based on a case of one instance. = =20 It would be like me saying that because I had apex seal failure and was using a "Used" rotor that everyone should refrain from using "pre-owned" rotors. Its like most other things in his "hobby", if you don't pay attention to the details and look at the possible failure modes, it may bite you. We now know to pay more attention to the condition of the apex seal slot than we perhaps did before. Fuel, cooling, ignition, etc are a= ll equally critical (and some would say more complex than lubrication - equa= lly critical). So thinking about and understanding your installation is the most time productive thing you can probably do.=0D =0D However, George, There is a very valid reason I can think of not to go=20 Plugs Up"=0D All the vendors (motor mounts, PSRUs, exhausts, intakes, etc) are buildi= ng their products for the Automobile orientation (which is the most common orientation). So if you want a compatibility with their products, then clearly "Plugs Up" is a drawback. I had to adapt Tracy's PSRU mount to m= y particular installation - not a big problem, but clearly one due to my=20 Plugs Up" orientation. There are a number of advantages in my opinion, b= ut not trying to sell "Plugs Up", so will refrain from enumerating them.=0D =0D =0D FWIW=0D =0D Ed A=0D =0D . =0D =0D =0D =0D =0D ----- Original Message ----- =0D From: WRJJRS@aol.com =0D To: Rotary motors in aircraft =0D Sent: Friday, May 20, 2005 1:08 PM=0D Subject: [FlyRotary] Re: Sized 13b=0D =0D =0D In a message dated 5/20/2005 9:13:31 AM Pacific Standard Time, echolakeresort@telus.net writes:=0D He said that the engine was mounted "plugs up" with a home made dry sump system that allowed the engine to run without oil pressure on start up un= til the system primed itself. The results was that all the bearings in the engine were "wiped out" completely (didn't size up really just stopped). = =0D Geeorges, =0D It must have been a really bad "dry sump." Since the engine seized there= as a bad problem. This is a very unusual failure mode for a rotary, that has actually started. A typical dry sump system uses a tank remote from the engine that would always have oil above the pressure pump. I would also suggest that unless you are real familiar with the engine to avoid plugs = up installation. With all deference to Ed A, most of us aren't ready to set = up that plumbing. I am not claiming that it won't work, Ed's obviously does, but you are responsible for the configuration, rather than the original engines engineers. Some people aren't that mechanically capable.=0D Bill Jepson=0D =20 --------------Boundary-00=_RY0T6RO0000000000000 Content-Type: Text/HTML; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable
Guys
I was only reporting what Atkins told me. I don't think "plugs up ha= ve anything to do with the problem, Venable 's dry sump system must = have had the oil tank to low without a check valve in the line & oil = the oil in the engine & lines drained back to the tank in turn runnin= g without oil pressure for 20 to 30 seconds at each start up (that is wha= t I gavered from the conversation with Atkins) I'm still going plugs up b= ut without a dry sump system (to much weight).
Georges B.
 
 
-------Original Message-------
 
Date: 05/20/05 11:= 59:37
Subject: [FlyRotar= y] Case of one? [FlyRotary] Re: Sized 13b
 
Well, George, appreciate all the engineering accolade= s you are laying on me.  However considering there have been a numbe= r of "Plugs UP" installations in addition to mine that have never had any= problem with lubrication, I think your caution somewhat exaggerated.&nbs= p; 
 
 The "bad" sump was (in my opinion) using a rubb= er hose on the suction end rather than a metal tube.  Any air leak a= t all and you lose your ability to pull the oil up. If the hose= lost stiffness due to heat, it could partially collapse also restri= cting oil flow.   But that apply to the pickups in the auto ori= entation as well.  If you have a leak (didn't use a gasket, sealant,=  hole in the pickup tube, stuff stuck on your screen, etc) on the su= ction side, you are going to have trouble getting oil pressure quickly.&n= bsp;
 
Now, I for one would consider it a problem if I could= n't  get oil pressure within 1-2 seconds  of firing up the= engine (regardless of orientation) , I would cringe thinking of metal on= metal rubbing, heating, eroding, etc.  I couldn't stand it and woul= d have to fix it. 
 
But, I try to avoid over generalization based on a ca= se of one instance.   It would be like me saying that because I= had apex seal failure and was using a "Used" rotor that everyone should = refrain from using "pre-owned" rotors.  Its like most other things i= n his "hobby", if you don't pay attention to the details and look at the = possible failure modes, it  may bite you.  We now know to pay m= ore attention to the condition of the apex seal slot than we perhaps= did before. Fuel,  cooling, ignition, etc are all equally crit= ical (and some would say more complex than lubrication - equally critical= ).  So thinking about and understanding your installation is th= e most time productive thing you can probably do.
 
However, George, There is a very valid reason  I= can think of not to go "Plugs Up"
 All the vendors (motor mounts, PSRUs, exhausts,= intakes, etc) are building their products for the Automobile orientation= (which is the most common orientation).  So if you want a compatibi= lity with their products, then clearly "Plugs Up" is a drawback.  I = had to adapt Tracy's PSRU mount to my particular installation - not a big= problem, but clearly one due to my "Plugs Up" orientation.  There a= re a number of advantages in my opinion, but not trying to sell "Plugs Up= ", so will refrain from enumerating them.
 
 
FWIW
 
Ed A
 
 .  
 
 
 
 
----- Original Message -----
<= B>From: WRJJ= RS@aol.com
Sent: Friday, May 20, 2005 1:08 PM=
Subject: [FlyRotary] Re: Sized 13b=

In a message dated 5/20/2005 9:13:31 AM Pacific Standard Time, echolakeresort@telus.net write= s:
He said that the engine was mounted "plugs = up" with a home made dry sump system that allowed the engine to run witho= ut oil pressure on start up until the system primed itself. The results w= as that all the bearings in the engine were "wiped out" completely (didn'= t size up really just stopped).
Geeorges,
 It must have been a really bad "dry sump." Since the engine se= ized there as a bad problem. This is a very unusual failure mode for a ro= tary, that has actually started. A typical dry sump system uses a tank re= mote from the engine that would always have oil above the pressure pump. = I would also suggest that unless you are real familiar with the engine to= avoid plugs up installation. With all deference to Ed A, most of us aren= 't ready to set up that plumbing. I am not claiming that it won't work, E= d's obviously does, but you are responsible for the configuration, rather= than the original engines engineers. Some people aren't that mechanicall= y capable.
Bill Jepson
 
--------------Boundary-00=_RY0T6RO0000000000000-- --=======AVGMAIL-428E42266CE4======= Content-Type: text/plain; x-avg=cert; charset=us-ascii Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Content-Description: "AVG certification" No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 266.11.13 - Release Date: 5/19/2005 --=======AVGMAIL-428E42266CE4=======--