|
Since you have checked the obvious, you might try
checking some less obvious things like whether your EC2 ground wires are
truly are grounded.
Thanks, Ed, but I'm WAY past that
:)
I checked the ground on the EC2 box, ground
stud and pin. I even checked the back side of the
pins on the EC2 board for 12v and ground. There's power in the box.
Interestingly enough I see a quick change in the NOP reading when I switch the
EC2 on via the regular switch, or via either injector circuit. It flashes an rpm
number, like 5 or so, briefly, then reverts to its annoying "NOPE" message. I'm
pretty sure this indicates that its receiving power.
Regards,
John (Tracking Tracy
through Arkansas)
|