Return-Path: Received: from access.aic-fl.com ([204.49.76.2] verified) by logan.com (CommuniGate Pro SMTP 4.3c3) with ESMTP id 880873 for flyrotary@lancaironline.net; Sun, 17 Apr 2005 13:49:49 -0400 Received-SPF: none receiver=logan.com; client-ip=204.49.76.2; envelope-from=unicorn@gdsys.net Received: from b9k4u9 (unverified [204.49.76.120]) by access.aic-fl.com (Rockliffe SMTPRA 4.5.6) with SMTP id for ; Sun, 17 Apr 2005 12:48:34 -0500 Message-ID: <001a01c54386$c5add670$784c31cc@b9k4u9> From: "Richard Sohn" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: New rotors, New housings Date: Sun, 17 Apr 2005 12:50:51 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0017_01C5434C.160FB1F0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_0017_01C5434C.160FB1F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Kelly, it is more like .354 thousands here in the 48. Would want to make the = seals to slopy. Richard Sohn N-2071U ----- Original Message -----=20 From: Kelly Troyer=20 To: Rotary motors in aircraft=20 Sent: Sunday, April 17, 2005 7:51 AM Subject: [FlyRotary] Re: New rotors, New housings -------------- Original message from keltro@att.net (Kelly Troyer): = --------------=20 Georges, Are these numbers in reference to the apex seal slot taper from=20 the bottom of slot (2.017 mm) to the top of slot (2.026 mm) which is a taper of (.009 mm) or about 3.54 thousands here in the 48 ?? -- Kelly Troyer=20 Dyke Delta/13B/RD1C/EC2=20 -------------- Original message from "Echo Lake Fishing Resort = (Georges Boucher)" : --------------=20 Correction, the readings were 2.017 to 2.026mm Georges =20 -------Original Message------- From: Rotary motors in aircraft Date: 04/16/05 19:05:31 To: Rotary motors in aircraft Subject: [FlyRotary] Re: New rotors, New housings Hi! Ken Do you you cut on a taper, where does your taper = start? or do you just skim 0.015" off each side for a total of 0.030". I = just measured the two rotors that were in a "GOOD" running 92 13b NA & = got a reading of 0.017 to 0.026mm, I guess they are toast. Georges Boucher -------Original Message------- =20 =20 =20 =20 =20 =20 =20 ------=_NextPart_000_0017_01C5434C.160FB1F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Kelly,
 
it is more like .354 thousands here in = the 48.=20 Would want to make the seals to slopy.
 
Richard Sohn
N-2071U
 
 
----- Original Message -----
From:=20 Kelly = Troyer
Sent: Sunday, April 17, 2005 = 7:51=20 AM
Subject: [FlyRotary] Re: New = rotors, New=20 housings

 

--------------=20 Original message from keltro@att.net=20 (Kelly Troyer): --------------

Georges,
    Are these numbers in reference to the apex = seal slot=20 taper from
the bottom of slot (2.017 mm) to the top of slot (2.026 mm) = which
is a taper of (.009 mm) or about 3.54 thousands here in = the 48=20 ??
--
Kelly Troyer
Dyke=20 Delta/13B/RD1C/EC2




--------------=20 Original message from "Echo Lake Fishing Resort (Georges Boucher)" = <echolakeresort@telus.net>: --------------

Correction, the readings were 2.017 to 2.026mm
Georges  
 
-------Original=20 Message-------
 
From: = Rotary motors in = aircraft
Date: = 04/16/05=20 19:05:31
To: = Rotary motors in = aircraft
Subject:=20 [FlyRotary] Re: New rotors, New housings
 
 Hi! Ken
Do you you cut on a taper, where does your taper = start?=20 or do you just skim 0.015" off each side for a total = of=20 0.030". I just measured the two rotors that were in a = "GOOD"=20 running 92 13b NA & got a reading of 0.017 to = 0.026mm, I=20 guess they are toast.
 
 Georges Boucher
-------Original=20 Message-------
 
  

 
 
------=_NextPart_000_0017_01C5434C.160FB1F0--