Return-Path: Received: from mtiwmhc11.worldnet.att.net ([204.127.131.115] verified) by logan.com (CommuniGate Pro SMTP 4.3c3) with ESMTP id 880792 for flyrotary@lancaironline.net; Sun, 17 Apr 2005 10:51:53 -0400 Received-SPF: none receiver=logan.com; client-ip=204.127.131.115; envelope-from=keltro@att.net Received: from 204.127.135.57 ([204.127.135.57]) by worldnet.att.net (mtiwmhc11) with SMTP id <20050417145123111000dbdhe>; Sun, 17 Apr 2005 14:51:23 +0000 Received: from [209.247.222.110] by 204.127.135.57; Sun, 17 Apr 2005 14:51:22 +0000 From: keltro@att.net (Kelly Troyer) To: flyrotary@lancaironline.net Subject: Re: [FlyRotary] Re: New rotors, New housings Date: Sun, 17 Apr 2005 14:51:22 +0000 Message-Id: <041720051451.3753.426277E9000F183200000EA92160376316019D9B040A05@att.net> X-Mailer: AT&T Message Center Version 1 (Feb 14 2005) X-Authenticated-Sender: a2VsdHJvQGF0dC5uZXQ= MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="NextPart_Webmail_9m3u9jl4l_3753_1113749482_0" --NextPart_Webmail_9m3u9jl4l_3753_1113749482_0 Content-Type: text/plain Content-Transfer-Encoding: 8bit -------------- Original message from keltro@att.net (Kelly Troyer): -------------- Georges, Are these numbers in reference to the apex seal slot taper from the bottom of slot (2.017 mm) to the top of slot (2.026 mm) which is a taper of (.009 mm) or about 3.54 thousands here in the 48 ?? -- Kelly Troyer Dyke Delta/13B/RD1C/EC2 -------------- Original message from "Echo Lake Fishing Resort (Georges Boucher)" : -------------- Correction, the readings were 2.017 to 2.026mm Georges -------Original Message------- From: Rotary motors in aircraft Date: 04/16/05 19:05:31 To: Rotary motors in aircraft Subject: [FlyRotary] Re: New rotors, New housings Hi! Ken Do you you cut on a taper, where does your taper start? or do you just skim 0.015" off each side for a total of 0.030". I just measured the two rotors that were in a "GOOD" running 92 13b NA & got a reading of 0.017 to 0.026mm, I guess they are toast. Georges Boucher -------Original Message------- --NextPart_Webmail_9m3u9jl4l_3753_1113749482_0 Content-Type: text/html Content-Transfer-Encoding: 8bit
 

-------------- Original message from keltro@att.net (Kelly Troyer): --------------

Georges,
    Are these numbers in reference to the apex seal slot taper from
the bottom of slot (2.017 mm) to the top of slot (2.026 mm) which
is a taper of (.009 mm) or about 3.54 thousands here in the 48 ??
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2




-------------- Original message from "Echo Lake Fishing Resort (Georges Boucher)" <echolakeresort@telus.net>: --------------

Correction, the readings were 2.017 to 2.026mm
Georges  
 
-------Original Message-------
 
Date: 04/16/05 19:05:31
Subject: [FlyRotary] Re: New rotors, New housings
 
 Hi! Ken
Do you you cut on a taper, where does your taper start? or do you just skim 0.015" off each side for a total of 0.030". I just measured the two rotors that were in a "GOOD" running 92 13b NA & got a reading of 0.017 to 0.026mm, I guess they are toast.
 
 Georges Boucher
-------Original Message-------
 
  

 
 
--NextPart_Webmail_9m3u9jl4l_3753_1113749482_0--