Return-Path: Received: from imo-m28.mx.aol.com ([64.12.137.9] verified) by logan.com (CommuniGate Pro SMTP 4.3c2) with ESMTP id 796802 for flyrotary@lancaironline.net; Wed, 16 Mar 2005 19:50:16 -0500 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.9; envelope-from=WRJJRS@aol.com Received: from WRJJRS@aol.com by imo-m28.mx.aol.com (mail_out_v37_r3.8.) id q.9b.5b68b95f (16097) for ; Wed, 16 Mar 2005 19:49:28 -0500 (EST) Received: from mblk-r36 (mblk-r36.mblk.aol.com [152.163.179.35]) by air-id11.mx.aol.com (v104.18) with ESMTP id MAILINID111-3ee14238d417370; Wed, 16 Mar 2005 19:49:27 -0500 Date: Wed, 16 Mar 2005 19:49:27 -0500 Message-Id: <8C6F8A24E6F2491-EFC-183E@mblk-r36.sysops.aol.com> From: wrjjrs@aol.com References: Received: from 66.127.99.234 by mblk-r36.sysops.aol.com (152.163.179.35) with HTTP (WebMailUI); Wed, 16 Mar 2005 19:49:27 -0500 X-MB-Message-Source: WebUI X-MB-Message-Type: User In-Reply-To: X-Mailer: AOL WebMail 1.0.0.11984 Subject: Re: [FlyRotary] Re: RD2-C - threadlocker Content-Type: multipart/alternative; boundary="--------MailBlocks_8C6F8A24E6F2491_EFC_1A2F_mblk-r36.sysops.aol.com" MIME-Version: 1.0 To: flyrotary@lancaironline.net X-AOL-IP: 152.163.179.35 ----------MailBlocks_8C6F8A24E6F2491_EFC_1A2F_mblk-r36.sysops.aol.com Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Ken, You are too right about locktite. I was a roadracer, but most of the same problems apply. We also had the high-RPM vibration over long periods to worry about. I often threatened to buy stock in Loctite, and probably should have, but didn't, damm it. The thing to remember is to be sure the threads are CLEAN when using it. Bill Jepson -----Original Message----- From: kenpowell@comcast.net To: Rotary motors in aircraft Sent: Wed, 16 Mar 2005 20:50:41 +0000 Subject: [FlyRotary] Re: RD2-C - threadlocker Mark, You probably want the purple loctite since a threadlocker is optional anyway - I think this is the #222 / small screw threadlocker; this breaks loose easily but does protect against vibration. I know that the blue is #242 (removable) and is what I usually use but it can require pretty high force to break loose. The red is #262 (permanent) and can be pretty tough to get loose and sometimes requires heat. They seem to make a product for everything - the RV guys have even found that the green (#290 I think) will stop a leaking gas tank rivet! I bet Bill Jepson has some real war stories about this stuff! The dirt bike racers keep the bikes together with this stuff since they don't usually use safety wire. Ken Powell Bryant, Arkansas 501-847-4721 -------------- Original message -------------- I assume you are talking about the front bearing retainer bolts. I don't use loctite on those but if you deem it necessary, be sure to use the lightest possible grade ie, lowest strength, type. I think loctite blue is the 'removable with hand tools' type. Tracy ----- Original Message ----- From: Mark R Steitle To: Rotary motors in aircraft Sent: Wednesday, March 16, 2005 10:22 AM Subject: [FlyRotary] RD2-C Tracy, I知 in the process of reassembling my RD2-C after doing the M/T bushing mod. Is there a preferred thread locking product that I should use for the small socket-head bolts? Mark S. ----------MailBlocks_8C6F8A24E6F2491_EFC_1A2F_mblk-r36.sysops.aol.com Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 8bit
Ken, You are too right about locktite. I was a roadracer, but most of the same problems apply. We also had the high-RPM vibration over long periods to worry about. I often threatened to buy stock in Loctite, and probably should have, but didn't, damm it. The thing to remember is to be sure the threads are CLEAN when using it.
Bill Jepson 
 
-----Original Message-----
From: kenpowell@comcast.net
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, 16 Mar 2005 20:50:41 +0000
Subject: [FlyRotary] Re: RD2-C - threadlocker

Mark,
You probably want the purple loctite since a threadlocker is optional anyway - I think this is the #222 / small screw threadlocker; this breaks loose easily but does protect against vibration.  I know that the blue is #242 (removable) and is what I usually use but it can require pretty high force to break loose. The red is #262 (permanent) and can be pretty tough to get loose and sometimes requires heat.  They seem to make a product for everything - the RV guys have even found that the green (#290 I think) will stop a leaking gas tank rivet!  I bet Bill Jepson has some real war stories about this stuff!  The dirt bike racers keep the bikes together with this stuff since they don't usually use safety wire. 

Ken Powell
Bryant, Arkansas
501-847-4721
 
-------------- Original message --------------
I assume you are talking about the front bearing retainer bolts.  I don't use loctite on those but if you deem it necessary, be sure to use the lightest possible grade ie, lowest strength, type.  I think loctite blue is the 'removable with hand tools' type.
 
Tracy
----- Original Message -----
Sent: Wednesday, March 16, 2005 10:22 AM
Subject: [FlyRotary] RD2-C

Tracy,
I知 in the process of reassembling my RD2-C after doing the M/T bushing mod. 
Is there a preferred thread locking product that I should use for the small socket-head bolts?
 
Mark S. 
----------MailBlocks_8C6F8A24E6F2491_EFC_1A2F_mblk-r36.sysops.aol.com--