Received-SPF: pass
 receiver=logan.com; client-ip=64.136.20.164; envelope-from=jbker@juno.com
Mime-Version: 1.0
From: "jbker@juno.com" <jbker@juno.com>
Date: Thu, 3 Mar 2005 11:07:32 GMT
To: flyrotary@lancaironline.net
Subject: Re: [FlyRotary] Re: two things happened today that I thought were far-
	out
Content-Type: text/plain
Message-Id: <20050303.030832.4501.12419@webmail32.nyc.untd.com>


Bob P wrote:
Are you going to change out the entire intake set up, or are you just going
to run the intake from the fire wall throttle body out into the slip stream?
(Out the side, out the top, or out the bottom)

--------------------------------------------

Hi Bob,

At this time, I'm just going to change the stuff upstream of the throttle body. Remove the snout on the underside of the cowl, take the "sewer pipe" peice out except for the plenum just upstream the T/B.

A very short snorkle on the port shoulder just at the rear of the cowling. Will make a picture in the next couple of days as it shapes up. Inlet area will be equal to Tracy's (4 inches sq) and diffuse slightly before dumping into the small plenum.

Bernie