|
Hi
Tracy;
Any updates on the EM2? No updates
recently on your website. Will it be compatible with RTD temp probes? I have RTD
ports installed on coolant out of engine and return to engine and would also
like to use the stock location on the block. Also have ports after the oil
cooler before engine/psru/turbo and before & after
intercooler.
Do you still expect a June (early?)
release date? It's the last large item I have left and hope to fly very soon
after.
S. Todd Bartrim
Turbo 13B RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm
"Whatever you vividly imagine, Ardently desire, Sincerely believe in,
Enthusiastically act upon, Must inevitably come to pass".
My engine has an oil temp sensor
in the pan, and a water temp sensor in the block (near the useless oil
pressure sensor). There’s also an outlet on the water pump housing that
could be used for temp, pressure, or maybe even a level sensor like my FD
has.
Are these stock temp sensors
compatible with most gauges, specifically the EM-2 (Tracy?) ?
If not, how hard is it to find the correct sensors that will screw
into these metric holes (in the US)? Does
anyone know what the thread size of these holes is?
|