George, originally I was going to hook up with a piece of hose over the butted pieces with a couple of hose clamps. That is how I will attach the other end at the throttle bodies. But, we have been considering welding and also building some type of flange. Certainly, for starters I will use the hose and clamp method. Jerry





On Wednesday, February 9, 2005, at 08:43 PM, George Lendich wrote:

Jerry,
Is that a but weld, OR does the tube go into the  bellmouth end OR a flange that they both go into.
George ( down under) 

----- Original Message -----
From: Jerry Hey
To: Rotary motors in aircraft
Sent: Thursday, February 10, 2005 9:35 AM
Subject: [FlyRotary] Re: P port intake

Yes, it is 1.61 inches.


On Wednesday, February 9, 2005, at 05:39 PM, Tom wrote:

Jerry,
Do you have an i.d. measurement for the narrow end?
 
TIA
Tom

Jerry Hey <jerryhey@earthlink.net> wrote:

Today UPS brought the bell mouths for the P port intake. They are
three inches o.d. across and have a smooth gradual taper down to the
runner size ...



<image.tiff>


Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'