On Sat, 6 Nov 2004 22:22:28 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:

>  
>
> I don't know what the numbers mean but I will let you know how it
> works
>
> out.  Todd reported his pump measured 4.3 amps at 9.3 gpm (if I
>
> understood his last post).  Mezarie may be reporting the "no load"
>
> pumping capacity, or Summit may have the current wrong.  I should have
>
> the pumps sometime next week.
>
>  
>
> Any idea what a ball park figure for the pressure drop across the
> engine
>
> and an evap core would be?  I could simulate it on the bench.
>
>  
>
> Bob White
>
>  
>
> Bob;
>
>  
>
> Paul Lamar is looking for one of these pumps to do the tests.  He
> already has the loop set up with flow and pressure measuring.  Why
> don't you send the pump to him and let him do the tests?
>
>  
>
> Al
>
>
Hi Al,

I thought about offering to buy one of the WP136's for Paul to test when
he made the offer. I had already decided a while back that I was going
to set up an EWP on my plane, but hadn't decided which pump(s) or how I
was going to configure them.  I am glad to see Paul make the offer to do
some testing.  I may work something out with him to do the measurements
but would like to check them out first myself.

Bob White



--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)