I just received an e mail with an invoice showing my 50 pins has been
shipped.  So they responded just in time.  It turns out I was glad I had
sent the Metri-Pack part number to the second company that looked to have
the best deal on the terminals.  It turns out although the pins look
identical that they are for the 280 series of Metri-Pack rather than the 150
series.  So obviously can't go by looks.

I will still have some "surplus" pins as I should only need 16 plus a couple
for spares {:>).

No "excess" required, Dana, those were seals/springs were just sitting in
the zip lock bags where I place them when I overhauled the engine a couple
of years ago.  Buy me a cool one someplace, sometime.


Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Dana Overall" <bo124rs@hotmail.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Tuesday, September 14, 2004 6:58 AM
Subject: [FlyRotary] Re: WAYTEX LS1 Plugs


> Ed, I'm in for some of the "excess" quantity also.  That way I can pay you
> for the connectors and drop a little "excess" in the envelope to
compensate
> you for the apex seal springs:-)
>
>
>
>
>
> Dana Overall
> Richmond, KY i39
> RV-7 slider, Imron black, "Black Magic"
> Finish kit
> 13B Rotary. Hangar flying my Dynon.
> http://rvflying.tripod.com/aero1.jpg
> http://rvflying.tripod.com/aero3.jpg
> http://rvflying.tripod.com/blackrudder.jpg
> do not archive
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>