Sender: <marv@lancaironline.net> (Marvin Kaye)
To: flyrotary
Date: Wed, 12 Mar 2003 13:34:58 -0500
Message-ID: <redirect-2050557@logan.com>
From: John Overman <mooneydryver@yahoo.com>
Subject: Re: [FlyRotary] Oil cooler dimensions?
In-Reply-To: <list-2047543@logan.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii


--- 13brv3@mchsi.com wrote:
> 
> Greetings all,
> 
> I did a lot of shopping for panel and engine goodies
> while I was holed up in
> the frozen hotel.  I think I have all the major
> items accounted for, except
> for the radiator and oil cooler.  I'm talking to
> Griffin about a custom rad,
> so that will be another message eventually, but for
> now, I'm interested in
> hearing about oil coolers.
> 
> On the Mazdatrix page
> http://www.mazdatrix.com/b6.htm  they show 3 factory
> oil coolers.  If I'm not mistaken, the 86-92 13B,
> pn- 14-700A-N326 cooler is
> the one that everyone recommends.  Is that correct? 
> It's about $500 new, so
> I'd probably try to find a good used one.  
> 
> If this is the correct cooler, can someone measure
> one, and tell me the
> dimensions?  I'm hoping to fit one of these in the
> right cheek of the stock
> RV-3 cowl, and keep the radiator under the engine. 
> Hi Rusty  
   you might be interested in the 93+ oil cooler. It
is supposed to have the same cooling area as the
earlier ones except it is actually two separate
coolers. Also for the radiator have you looked into
Howe racing radiators? They are tig welded aluminum
and are very efficient If they don't have the size you
want they will make it. 
                       John


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/