|
Re: [FlyRotary] Re: Fuel Filter Part Number Was Re: EFI FilterQuestion
Ah ha! Then you do not want the Saginaw
fittings for that purpose. I know that you can replace the barbs on
Tracy's pumps with threaded fittings, but I do not know the
size. I am certain that Tracy would know - if he ever got back on line
with us.
I have been waiting for my pumps to get old so I
could replace them with the types you can use the screw fitting on - but they
just keep pumping along.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
Sent: Monday, July 26, 2004 3:57 PM
Subject: [FlyRotary] Re: Fuel Filter Part
Number Was Re: EFIFilterQuestion
On 7/26/04
3:51 PM, "Ed Anderson" <eanderson@carolina.rr.com>
wrote:
Bullent, I will
have to check (memory only lasts so long at my age). I believe I got
them from EARLS Performance, but as best I recall they were available
several places.
Here is another reference to the GM filter with the Saginaw
connectors. They also had the Saginaw connectors but only already
attached to a fuel line or tube (stainless steel)
http://www.diy-efi.org/gmecm/component_info/efi_fittings.html
Ed,
I’m actually looking to
replace the fittings on the pumps I bought from Tracy. They come with
hose barb ends and I want to make them AN.
Bulent
|