Return-Path: <13brv3@bellsouth.net> Received: from imf24aec.mail.bellsouth.net ([205.152.59.72] verified) by logan.com (CommuniGate Pro SMTP 4.2b8) with ESMTP id 334908 for flyrotary@lancaironline.net; Mon, 26 Jul 2004 15:45:08 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.72; envelope-from=13brv3@bellsouth.net Received: from rd ([65.6.194.9]) by imf24aec.mail.bellsouth.net (InterMail vM.5.01.06.08 201-253-122-130-108-20031117) with ESMTP id <20040726194418.DIZO1756.imf24aec.mail.bellsouth.net@rd> for ; Mon, 26 Jul 2004 15:44:18 -0400 From: "Russell Duffy" <13brv3@bellsouth.net> To: "Flyrotary List" Subject: metric tubing? Date: Mon, 26 Jul 2004 14:44:25 -0500 Message-ID: <000b01c47348$f4de1090$6101a8c0@rd> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000C_01C4731F.0C080890" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6626 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 This is a multi-part message in MIME format. ------=_NextPart_000_000C_01C4731F.0C080890 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Greetings, =20 I mentioned that I need to make a sleeve to adapt the MSD injectors to = the holes in the center housing. I was trying to find a stock piece of = steel (or anything else that will work) tubing that had an ID of .55", and an = OD greater than .65". The plan would be to put this on the lathe, and turn = the OD down to a nice fit in the holes in the block. As it turns out, 14mm = is almost exactly .55", and certainly close enough for the o-ring seal that will go there. =20 =20 Searching the internet, the only place I found that has this is Parker = Steel International, and they're a wholesale only place, requiring tax exempt numbers, minimum orders, etc. Does anyone know where I can get 14mm ID tubing that would work for this? =20 Thanks, Rusty (in search of a better GPS display) ------=_NextPart_000_000C_01C4731F.0C080890 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message
Greetings,
 
I mentioned = that I need to=20 make a sleeve to adapt the MSD injectors to the holes in the center=20 housing.  I was trying to find a stock piece of steel (or anything = else=20 that will work) tubing that had an ID of .55", and an OD greater than=20 .65".  The plan would be to put this on the lathe, and turn the OD = down to=20 a nice fit in the holes in the block.  As it turns out, 14mm is = almost=20 exactly .55", and certainly close enough for the o-ring seal that will = go=20 there. 
 
Searching the = internet, the=20 only place I found that has this is Parker Steel International, and = they're=20 a wholesale only place, requiring tax exempt numbers, minimum orders, = etc. =20 Does anyone know where I can get 14mm ID tubing that would work for=20 this?
 
Thanks,
Rusty (in = search of a=20 better GPS display)
------=_NextPart_000_000C_01C4731F.0C080890--