Return-Path: <ronmilligan@cox.net>
Received: from fed1rmmtao09.cox.net ([68.230.241.30] verified)
  by logan.com (CommuniGate Pro SMTP 4.2b8)
  with ESMTP id 333984 for flyrotary@lancaironline.net; Sun, 25 Jul 2004 23:55:39 -0400
Received-SPF: error
 receiver=logan.com; client-ip=68.230.241.30; envelope-from=ronmilligan@cox.net
Received: from cx541590d ([68.5.29.159]) by fed1rmmtao09.cox.net
          (InterMail vM.6.01.03.02.01 201-2131-111-104-103-20040709)
          with SMTP
          id <20040726035511.QMQJ290.fed1rmmtao09.cox.net@cx541590d>
          for <flyrotary@lancaironline.net>;
          Sun, 25 Jul 2004 23:55:11 -0400
From: "Ron Milligan" <ronmilligan@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: EFI Filter Question
Date: Sun, 25 Jul 2004 20:27:11 -0700
Message-ID: <NDBBIHDGKLNGNFPPEPHPOEHBDEAA.ronmilligan@cox.net>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
In-Reply-To: <list-333981@logan.com>
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Importance: Normal

Thanks for the info.  I would like to keep it all AN fittings since it will
be in the cockpit.  You wouldn't happen to have part numbers or make and
model of the filters.  I could try to go into an autoparts store but they
aren't always friendly with R&D requests. :)

Ron

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Ed Anderson
Sent: Sunday, July 25, 2004 8:39 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: EFI Filter Question


Ron

    I used a coarse fuel filter between the tanks and the pumps (its one of
the small removable screen- they type only meant to keep out big things) and
I use two GM EFI fuel filters (one for each EFI pump) that you can get in
any auto parts store.  I use the ones that have the Saginaw?screw fittings -
you can get them with just tubes for clamp-on hose fittings.  I change them
out each annual and they have worked fine for me.  (cheap too)

I use pumps very similar to the ones that Tracy uses, if Tracy sells them I
would not hesitate to buy them from him. When my pumps wear out I will go
with his.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Ron Milligan" <ronmilligan@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, July 25, 2004 10:55 PM
Subject: [FlyRotary] EFI Filter Question


> Trying to get all the parts together for my fuel system.  What is everyone
> using for their prefilter and EFI filter?  I plan on ordering my fuel
pumps
> from Tracy unless someone knows a better source.  Thanks in advance.
>
> Ron Milligan
> RV7 QB Fuse
> Aliso Viejo CA
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html