Received-SPF: error
 receiver=logan.com; client-ip=24.25.9.100; envelope-from=eanderson@carolina.rr.com
Message-ID: <000d01c472c2$06d21670$2402a8c0@EDWARD>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-333965@logan.com>
Subject: Re: [FlyRotary] EFI Filter Question
Date: Sun, 25 Jul 2004 23:38:33 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Ron

    I used a coarse fuel filter between the tanks and the pumps (its one of
the small removable screen- they type only meant to keep out big things) and
I use two GM EFI fuel filters (one for each EFI pump) that you can get in
any auto parts store.  I use the ones that have the Saginaw?screw fittings -
you can get them with just tubes for clamp-on hose fittings.  I change them
out each annual and they have worked fine for me.  (cheap too)

I use pumps very similar to the ones that Tracy uses, if Tracy sells them I
would not hesitate to buy them from him. When my pumps wear out I will go
with his.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- 
From: "Ron Milligan" <ronmilligan@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, July 25, 2004 10:55 PM
Subject: [FlyRotary] EFI Filter Question


> Trying to get all the parts together for my fuel system.  What is everyone
> using for their prefilter and EFI filter?  I plan on ordering my fuel
pumps
> from Tracy unless someone knows a better source.  Thanks in advance.
>
> Ron Milligan
> RV7 QB Fuse
> Aliso Viejo CA
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>