<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
After thinking about this....I would have to disagree.  If you level the
plane, the BL-50 level line should be level.  So, it seems to me that you
could position the HS at a 1 to 1.2 neg. degree with a plumb bob and a smart
level rather easily by finding the perpendicular with the plumb bob and
establishing the angle from there.  Of course, I haven't done any work on my
HS as of yet.....so I could be missing something here.

Curtis Krouse N753K

> The manual calls for establishing neg 1 to neg 1.2 degrees relative to the
BL-50
> level line. My conclusion is that I don't have the skill or the equipment
to
> achieve this level of accuracy!
> Angier Ames


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>