<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I used the AML series of MicroSwitch rocker, momentary,  and paddle
switches on my Lancair exclusively.  They come in most any color, are back
lit, and can be engraved.  They are very good looking however, observe the
contact ratings and use relays to control larger loads  when necessary.

The AML24 series rockers can even have split back lighting.  For example,
my  Pitot Tube heat rocker is always lit on the bottom half where the
"PITOT HEAT" engraving is located.  The upper half of the switch labeled
"ON" is not back lit unless there is current to the pitot tube.  I had the
switches engraved and filled at a local vendor.

My catalog is rather old but it is titled Honeywell MicroSwitch Manual
Switches Catalog 30.  Check with your local distributor for a catalog.

Jim Frantz    
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>