<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I had the same problem with mine - first problem is that I was
expecting it to return before I charged the system with hydraulic fluid.  It
got better (mostly) after I filled the system.

It still was a bit sluggis to center so I bent the return spring and bonded
a small square of phenolic on the support bracket under the spring to
increase the tension.  It seems to work pretty well now.

Regards,

John Barrett

From: AVIDWIZ@aol.com
Subject: Message-ID: <4a.141009bd.2804d28c@aol.com>

In my IVP the flap handle must be returned to the netural
If you find a way to make it return automatically please advise!
Dave Riggs



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>