Message-ID: <002701c0f605$48e96aa0$1cacb2d1@walter>
From: "Walter Dodson" <coy0te@earthlink.net>
To: "LancairList" <lancair.list@olsusa.com>
Subject: K & N air filter # E-2865 for IV-P
Date: Fri, 15 Jun 2001 18:40:10 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I had a great e-mail session the last two days with Mr. Richard Blum of K&N.
After purchasing from them what I believe is the largest air filter which
will fit into the IV-P plenum without raising the lid, I wrote to them
asking for flow data.  To my pleasant surprise Rick was very kind and
figured out what our TSIO-550 will flow at 38".  That is equal to 18.67psi
or a 4lb boost as the car guys say.  My trusty old Pratt & Whitney vest
pocket handbook says inches of Hg times 0.4912 yields psi.
The K&N will flow 565 cfm and our engine will produce 545 cfm.  That leaves
less than 4% margin. I searched the K&N parts book for a filter to fit our
plenum tightly.  The E-2865 is what I've come up with.
I hope this info is usefull, if there is a better design out there let's
have it.
Walter Dodson  IV-P 55%

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>