<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Gary,

I have a 4 inch pipe welded about 3 inches below the bottom bolt attach
points on a 360  engine mount.  The pipe rested in another pipe about 4 1/2
inch ID.  This sat upon a stanchion bolted to the floor.   This permitted
the entire fuselage to spin in my  9 ft. garage with an inch or so to spare.
No fancy cogs, or ratchets, just a big blob of grease between the tubes.
Absolutely great especially for body work.  It saved my back for $150 in
parts and welding.  Does anybody want it?

I supported the tail forward of the empenage.  You could just as easily make
a wheel or disc assembly attaching at the rudder attach points.

Larry
N360LH



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>