Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5.2) with ESMTP id 1025131 for rob@logan.com; Mon, 14 Jan 2002 22:36:54 -0500 Received: from imf02bis.bellsouth.net ([205.152.58.22]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Mon, 14 Jan 2002 21:05:36 -0500 Received: from dgwest ([216.78.10.172]) by imf02bis.bellsouth.net (InterMail vM.5.01.04.00 201-253-122-122-20010827) with SMTP id <20020115020817.ESOL14373.imf02bis.bellsouth.net@dgwest>; Mon, 14 Jan 2002 21:08:17 -0500 Message-ID: <003701c19d67$98e632e0$ac0a4ed8@dgwest> From: "Dana Westphal" To: , "Jim Thomas" References: <20020114161505.51657.qmail@web20002.mail.yahoo.com> Subject: Re: Releasing Legacy Gear Doors Date: Mon, 14 Jan 2002 19:54:34 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Jim, Thanks for the info/tips. My left side doors matched the contour nicely, the left side not so good. I wonder if one could heat the door and bend it to better match the belly pan contour? The gaps for the inboard doors are fairly uniform and only required minimal sanding to get a pretty decent fit (an even 0.06" Popsicle stick gap). However, the outboard gear door gaps seem a bit too wide. Did you have to perform the gear door mod/stiffening per the SB? If so, did you do that before or after the release and was it a pretty easy mod? I am waiting for my mod kit from Lancair. Dana Westphal L2K-165 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://members.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please remember that purchases from the Builders' Bookstore assist with the management of the LML. Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>