<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
High,

It's very interesting to read every day about building techniques through
the LML. This is my first mail to it.

I'm working on the horiz. stabilizer and elevator.
I read a lot about the small tail elevator trimming system in the LML
archives; but few about the elevator Mac servo trim of the MK2.

My question : Are all pilots, flying the MK2, happy with the Mac servo
elevator trim?
Sensitivity and effectiveness... through the full speedrange? I know one
builder mentioned somewhere, he had to lower the voltage supply to the Mac
servo  at high speed, because this reduces sensitivity of the trim.

In the Lancair FB manual [ page 7(B)-34 ] they mention the " anti-servo "
trim tab for the elevator. Don't know what this system is ?

High M. Pienaar, are you out there? I'll be in Pretoria  in about 2 weeks,
for 1 day. Would like to visit your project.

Albert        Port-Gentil / Gabon










>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>