From: RWolf99@aol.com
Message-ID: <95.557cbb3.278e13c0@aol.com>
Date: Wed, 10 Jan 2001 14:36:32 EST
Subject: Re: Fru Fru Duster
To: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
In a message dated 1/10/01 1:51:50 AM EST, lancair.list@olsusa.com writes:

<< Jim and I 
 have the tubes installed and are ready to install the cables, so I'd only 
 need it for a couple of days, and can then send it on. >>

Bob Pastusek -

My understanding on this was that you only needed the "Fru Fru Duster" if 
your cables were already in place.  Dick Simkanin's (Arrow Plastics CEO and, 
I believe, a Lancair builder as well) instructions to me when I bought teflon 
powder from him were to put the teflon powder in a rag and work it into the 
cables by hand prior to installation.  This is what I intended to do (not 
there yet though most cable guides are installed) and therefore I'm not sure 
that you or I need the duster.

I have also soaked my cables in methylene chloride to remove the lubrication 
it comes with from the supplier.  (By the way, don't pour dirty MC on your 
lawn or the spot will turn brown very quickly and take several months to 
regenerate...)

I'm posting this in hopes that any misunderstandings on this issue can be 
corrected.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>