<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I used WLS exclusively on my Lancair 290 and I have been using it on my
Lancair IV.  I Brush and squegee the first coat on to get it into the
pinholes.  I sand that first coat with 80 grit and remove most of it.  That
fills the weeve and most of the pin holes.  I then spray on several more
coats block sanding between coats.  I don't think that WLS is that hard to
sand, but I haven't tried that many other primers.  I like WLS

Tom Byrnes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>