Return-Path: Received: from web4801.mail.yahoo.com ([216.115.105.199]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with SMTP id com for ; Sun, 12 Nov 2000 09:16:16 -0500 Received: from [4.54.90.189] by web4801.mail.yahoo.com; Sun, 12 Nov 2000 06:23:52 PST Message-ID: <20001112142352.14765.qmail@web4801.mail.yahoo.com> Date: Sun, 12 Nov 2000 06:23:52 -0800 (PST) From: Charlie Kohler Subject: Rod Ends To: Lancair List X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> An additional tip that will result in an rivet that looks (and is) professional. As Mike said--- Fill Cup ends of rod end bearings from leftover flox. THEN after drilling /and before installing properly cut long rivet--- put several drops of resin/instant glue in hole and tap/seat rivet head securely. Wait till glue dries THEN set end with proper tools. PS. Don't forget to install rod ends with Locktite!! See all the good stuff thats passed out at the EAA Sportair Lancair builders course! ===== Charlie Kohler >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>