From: MDAeroInc@aol.com
Message-ID: <5a.ce713b4.273de05b@aol.com>
Date: Fri, 10 Nov 2000 18:35:55 EST
Subject: Re: rod ends
To: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
In regards to filling the rod ends with micro.  If memory serves, the IV 
manual call for the rod ends with an open end with flox.  Use flox instead of 
micro because micro will crush and shift easier then flox.  What I did was 
take all my rod ends that would accept filling & insert the threaded end into 
a cardboard box then fill them all at once. 
Mike DeHate
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>