Posted for Steve Richard <steve@oasissolutions.com>:

> See attached.  Not the most elegant, but it works......so far.  Any method
>that focuses on the rudders pedals uses the rudder cable system to take the
>hit from gusts.  Not always good.  A better system would lock it in the rear
>at the hinge, but I could not figure out how to do it without creating other
>problems.  I too tried clamps at the top of the rudder, but I needed to carry
>a step to install/uninstall.  Plus anything slipped in between the rudder and
>vertical stab at the counter weight always scuffed the paint.
>
> Steve
>
>From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of George
>Rosel
> Sent: Tuesday, January 21, 2014 11:04 AM
> To: lml@lancaironline.net
> Subject: [LML] Lancair IV-P control locks
>
> Hello Gang,
>
> Does anyone have a good idea on how the best way to lock the rudder control
>without a clamp at the top of the rudder? Just not convenient putting a clamp
>up there!!??
>
> Suggestions and pictures would be great.
>
> Thanks,
>
> ... George (Lancair 4P-T owner, N193CG)
>
>
> George F. Rosel
> also...
> "The Lodge at Timberline", Copper Mtn., Colorado ... a true "ski-in/ski-out"
>Luxury Home for RENT
> ... Click here to view my webpage: http://www.vrbo.com/254739   or...
> http://www.LodgeAtTimberline.com<http://www.lodgeattimberline.com/>