Mailing List lml@lancaironline.net Message #68939
From: Chris Zavatson <chris_zavatson@yahoo.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] LNC2 Hartzell prop torque value
Date: Tue, 14 Jan 2014 08:28:59 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
60-70 ft-lbs for the R-flange.  These values are found in the Hartzell Owner's Manual.  I highly recommend getting one from Hartzell if you don't have one.   There are a lot of not standard bolt torques used on the propeller. The use of standard bolt torques will damage the hub.  There is also a good section on maintenance and grease selection. 

Chris Zavatson
N91CZ
360std


On Sunday, January 12, 2014 5:46 PM, Danny <danny@n107sd.com> wrote:
I have a Hartzell (HC-F2YR-1F) prop on an IO-360 that I have to take off to replace the crank oil seal.  As with many other items, I can find no information on the prop hub torque values.  Anybody happen to know?
 
Danny
LNC2-360 Mk-II
Nothing is foolproof to the sufficiently talented fool.
 


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster