Return-Path: Received: from imo-r03.mx.aol.com ([152.163.225.3]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Thu, 28 Sep 2000 09:55:22 -0400 Received: from RicArgente@cs.com by imo-r03.mx.aol.com (mail_out_v28.24.) id k.61.785debc (3964) for ; Thu, 28 Sep 2000 10:02:19 -0400 (EDT) From: RicArgente@cs.com Message-ID: <61.785debc.2704a96b@cs.com> Date: Thu, 28 Sep 2000 10:02:19 EDT Subject: Re: Vision Micro Problems To: lancair.list@olsusa.com X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> In a message dated 09/28/2000 9:58:32 AM Eastern Daylight Time, matt.hapgood@funb.com writes: << When I first start my engine, the starter appears to draw so much power that the VisionMicro shuts down. This is very annoying, as it takes about 5 or 10 seconds to reboot, during which time their is no RPM, oil pressure... monitoring available. >> Matt, I have the EP800 and the same thing happens since the first time I started my engine... Everything blanks out. Visionmicrosystems told me it was normal. Rick >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>