Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Tue, 29 Oct 2013 11:09:28 -0400
Message-ID: <redirect-6568738@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=98.138.91.140; envelope-from=mcmess1919@yahoo.com
From: "Steve Colwell" <mcmess1919@yahoo.com>
References: <list-6568565@logan.com>
In-Reply-To: <list-6568565@logan.com>
Subject: Plans for concrete block, floor jack & motorized Tow Bar
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: Ac7UqD/Iit7JHnVeRoaPf1ysYK4KpQACQLNg
Content-Language: en-us

Two or three 5 gallon buckets filled with water is a quick and easy
substitute for a rolling concrete slab.

Steve Colwell  Legacy


Subject: [LML] Plans for concrete block, floor jack & motorized Tow Bar

Does anyone have the plans/materials specs on how to build the rolling
bucket of cement for the tail stand?

I had ran across it in the plans and can't remember where they are. I think
I should be able to get the needed supplies at Lowes.

Also Looking for recommendations on a floor jack for the ES.  It seems that
many of the automotive ones are too big or cumbersome to get under the main
wheels.  I don't know about jacking the nose up?  How is that done.  I was
told you can lift from under the firewall.  

Lastly, is there an affordable motorized tow bar that works with the nose
wheel fairing for the ES.

Thanks all.
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html