Return-Path: <lancair.list-request@olsusa.com>
Received: from dskfw1.funb.com ([168.175.254.61]) by ns1.olsusa.com
(Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
with ESMTP id com for <lancair.list@olsusa.com>;
Mon, 11 Sep 2000 09:44:07 -0400
Received: (from uucp@localhost) by dskfw1.funb.com (8.8.5/8.8.5) id JAA21040 for <lancair.list@olsusa.com>; Mon, 11 Sep 2000 09:50:53 -0400 (EDT)
Received: from clt-msw-01.funb.com(168.175.76.103) by dskfw1.funb.com via smap (V2.0)
id xma020472; Mon, 11 Sep 00 09:50:23 -0400
Received: from cltastr02.capmark.funb.com (unverified) by clt-msw-01.capmark.funb.com
(Content Technologies SMTPRS 4.1.5) with ESMTP id <Ta8af4c67a04e955f24cf@clt-msw-01.capmark.funb.com> for <lancair.list@olsusa.com>;
Mon, 11 Sep 2000 09:44:49 -0400
Received: from clt-conn-01.capmark.funb.com (unverified) by cltastr02.capmark.funb.com
(Content Technologies SMTPRS 2.0.15) with ESMTP id <B0001744247@cltastr02.capmark.funb.com> for <lancair.list@olsusa.com>;
Mon, 11 Sep 2000 09:47:34 -0400
Received: by clt-conn-01.capmark.funb.com with Internet Mail Service (5.5.2650.21)
id <R522XCJJ>; Mon, 11 Sep 2000 09:44:18 -0400
Message-Id: <CA33F0348ED9D21187CF0008C7CF284C02AA5F6B@clt-exch-05.capmark.funb.com>
From: "Hapgood, Matt" <matt.hapgood@funb.com>
To: "'lancair.list@olsusa.com'" <lancair.list@olsusa.com>
Subject: RE: AoA Sense Location
Date: Mon, 11 Sep 2000 09:44:19 -0400
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
First Union Securities, Inc.
-- Could you put this in your aileron bellcrank bay? It can go aft of the
front
-- spar, in my opinion. Anywhere up to 40% of the way back from the leading
-- edge, as I recall. Just put it up near the from part of the aileron bay,
if
-- you can.
I have placed my AoA pressure ports in the aileron bellcrank inspection area
on my LNC2. Haven't tested it yet, so I don't know if it will work. I'll
keep the group posted...
(Note - I probably will have to order a new port gizmo, because the idiot
"professional" who installed it also primered over the lower port. I doubt
I'll be able to able to find the hole...
M
[Matt... the lower port is the one that is mounted to the little phenolic
square. Since your ports are accessible from inside the aileron
bellcrank inspection area you should be able to get in there and remove
the tube from your lower port. With the tube removed you should also be
able to drill a new #60 hole from the inside out right through the
tubing barb. I can't imagine this approach would have any deleterious
effects on the installation... once the hole is redrilled simply replace
the tubing and you should be golden. Just a thought.
<Marv> ]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website: http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>