lml@lancaironline.net Mailing List Archive

I totally agree.

Matthew does fantastic work and is fairly priced. I won’t hesitate to have him do additional work on any aircraft I have.

dave

IV-P sold

IV-P on financial hold

From: PETER WILLIAMS

Sent: Monday, June 03, 2013 5:03 AM

To: lml@lancaironline.net

Subject: [LML] Re: Lancair shops

Danny

the shop i use for my 4P is in Daytona Florida.
Fibercraft is located on 7FL6.

last time i was there in May, there were two 4P Lancair, two Cirus with Ballistic Chute replacement (which is some kind of special approvals) an Epic and other aircraft

Matthew was part of the original development team for the Lancair 4. he has build ten Lancair 4s.

along with a lot of regular work he built me a carbon fiber rudder which is 25 pounds lighter than the "fast build rudder"
in my case the savings was 29 pounds down to 19 pounds that improved my CG by about 3/4 inch.

honest and very knowledgeable. and helpful

good luck

peter

To: lml@lancaironline.net
Date: Sun, 2 Jun 2013 02:32:10 -0400
From: danny@n107sd.com
Subject: [LML] Lancair shops

I need some work done on my LNC2 and while I love doing my own work, I just don’t have the time. Nothing serious, just cosmetics (inside & out), flight control gap seals, engine baffling and a few other odds & ends. Can anybody recommend a good shop in the northern VA area. I’m based at Manassas Regional Airport but any shop within 2-3 hours flight time is good with me. I just want to be sure the shop is reputable and they know the Lancair line.

Danny

LNC2-360 Mk-II

Nothing is foolproof to the sufficiently talented fool.