To: lml@lancaironline.net
Date: Mon, 3 Jun 2013 11:48:03 -0400
From: tednoel@cfl.rr.com
Subject: [LML] Re: Lancair shops
Peter,
What is the name of the shop? I'm based in DeLand.
Ted Noel
On 6/3/2013 8:03 AM, PETER WILLIAMS
wrote:
Danny
the
shop i use for my 4P is in Daytona Florida.
Fibercraft
is located on 7FL6.
last
time i was there in May, there were two 4P Lancair, two Cirus
with Ballistic Chute replacement (which is some kind of
special approvals) an Epic and other aircraft
Matthew
was part of the original development team for the Lancair 4.
he has build ten Lancair 4s.
along
with a lot of regular work he built me a carbon fiber rudder
which is 25 pounds lighter than the "fast build rudder"
in my
case the savings was 29 pounds down to 19 pounds that improved
my CG by about 3/4 inch.
honest
and very knowledgeable. and helpful
good
luck
peter
To:
lml@lancaironline.net
Date: Sun, 2 Jun 2013 02:32:10 -0400
From:
danny@n107sd.com
Subject: [LML] Lancair shops
I need some work done on
my LNC2 and while I love doing my own work, I just don’t
have the time. Nothing serious, just cosmetics (inside
& out), flight control gap seals, engine baffling
and a few other odds & ends. Can anybody recommend
a good shop in the northern VA area. I’m based at
Manassas Regional Airport but any shop within 2-3 hours
flight time is good with me. I just want to be sure the
shop is reputable and they know the Lancair line.
Danny
LNC2-360 Mk-II
Nothing is foolproof to
the sufficiently talented fool.
No virus
found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3343 / Virus Database: 3184/6378 - Release Date:
06/02/13