There’s a strong possibility you may have an internal leak in one or more of your gear actuators that you can’t see.  The only way to know is to isolate each one, one at a time, and then cycle the gear until you find the culprit.  Rebuild kits (bunch of O-rings) are available from Lancair.

 

Danny

LNC2-360 Mk-II

Nothing is foolproof to the sufficiently talented fool.

 

 

 

From: marv@lancair.net [mailto:marv@lancair.net]
Sent: Friday, May 24, 2013 8:17 AM
To: lml@host295.hostmonster.com
Subject: [LML] Lancair 360 LNC2 hydraulic issue

 

Posted for RV Driver <rvsocal@gmail.com>:

Hello LML

I am a new lancair 360 owner and wanted to ask a question

I have a random cycling of the landing gear hydralic pump which runs for
about 1 sec every 1 min.  I checked the fluid level and it is fine and I
can see no obvious leaks

Any Ideas ??

Roger

 

[Welcome aboard, Roger.  Sounds like you have a leaky dump valve... I'm sure other members will be suggesting additional likely alternatives, but this is a classic that has come up many times in the past.  I'm confident the LML will help get you through it.... hang in there.  <marv>    ]

 

--

For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html