lml@lancaironline.net Mailing List Archive

If the other elevator checks ok, then the builder probably installed wires from the control surfaces to the fuselage. Check to see if there is a faulty connection between the elevator and the fuse.

Dave.

----- Original Message -----
From: Sky2high@aol.com
To: lml@lancaironline.net
Sent: Wed, 28 Sep 2011 11:49:54 -0000 (TC)
Subject: [LML] Re: Static wick

Re-order the kit and a lot of sandpaper.

Otherwise, ck the carbon footprint.

If most of them are "bonded", consider how you might bond that lone
ranger........

Grayhawk

In a message dated 9/27/2011 5:33:55 P.M. Central Daylight Time,
panelmaker@earthlink.net writes:

Friend has a L-IV that has static wicks. One on the
  starboard elevator is poorly installed or constructed from the original
  builder. It has no continuity to other wicks or anything metal (all the rest
  of the wicks do). So I suspect it needs work.
How do I go about making
  that static wick installation over?
Jim

If it tastes good spit
  it out. – my cardiologist