I believe Nick said he climbed to 14,000 feet and set cruise power of 28"/2300 rpm.  28"/2300 should easily pressurize the cabin to 5.5 psi.

Pete

-----Original Message-----
From: Jeff Edwards [mailto:vtailjeff@aol.com]
Sent: Tuesday, September 06, 2011 7:31 AM
To: lml@lancaironline.net
Subject: Re: [LML] Figuring out the pressurization system IV-P -- couple of questions

D,

Your power setting was likely too low at 28 Inches to fully pressurize the cabin. 2300 rpm is also a very low number for climb. If you haven't already, I would recommend getting a good Lancair instructor to assist in your training.

Best regards,

Jeff Edwards
President LOBO

On Sep 5, 2011, at 4:14 PM, Dico Reijers <dico@internetworks.ca> wrote:

> Hi All,
>
I then climbed to 14000' to see how the system would react (Power setting 28" and 2300RPM
>
> Dico