Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 22 Aug 2011 13:28:42 -0400
Message-ID: <redirect-5100120@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.210.176; envelope-from=ronlaughlin@gmail.com
Content-Type: text/plain; charset=us-ascii
Mime-Version: 1.0 (Apple Message framework v1244.3)
Subject: Re: [LML] Fuel injector cleaning
From: Ron Laughlin <ronlaughlin@gmail.com>
In-Reply-To: <list-5099835@logan.com>
Content-Transfer-Encoding: quoted-printable
References: <list-5099835@logan.com>

You might want to do a "cruise power" LOP mag check before pulling =
injectors. It's more likely a plug(s) or plug harness problem than an =
injector. Also, a "GAMI spread" test should be done. Please refer to the =
GAMI website for instructions.
Ron


On Aug 22, 2011, at 9:09 AM, paul miller wrote:

> Question: On my IO-550N which I run LOP almost all the time, it runs =
quite well on the stock injectors.  It now has almost 500 hours and I do =
not believe the injectors have ever been cleaned.    I am getting some =
small vibration at LOP now and one or two cylinders are getting colder =
than the others leaning.  I would like to hear from people with =
experience on how they cleaned, what materials or ultrasonic cleaner was =
used and whether they replace the o-rings and where to get them.
>=20
> Paul
> Legacy, Calgary
> --
> For archives and unsub =
http://mail.lancaironline.net:81/lists/lml/List.html