Mailing List lml@lancaironline.net Message #57870
From: <marv@lancair.net>
Subject: Re: Finishing Elevator Question
Date: Mon, 28 Mar 2011 09:31:23 -0400
To: <lml@lancaironline.net>
Posted for "Greenbacks, UnLtd." <N4ZQ@verizon.net>:

 Closing the elevators:
 
From the manual p.7(B)-30 "Note: use a straight edge to check your elevator
skins and make sure they are not bowed.If the micro cures while the skin is
bowed, this goof will show up in both the cap strips and after the elevator is
closed. Always check for straightness"
 
From the manual p.7(B)-37 "Note: Once again you must use a straight edge to
check that your skin is not bowed. You may have to shuffle your weights around
to allow room for the straight edge check but it is worth it. This is for all
the marbles, so check and double check. Readjust weights if necessary."
 
 Come on guys, don't you read your instruction manuals?
 
 Angier Ames
 N4ZQ
 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster