X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 11 Aug 2008 14:26:43 -0400 Message-ID: X-Original-Return-Path: Received: from fmailhost04.isp.att.net ([207.115.11.54] verified) by logan.com (CommuniGate Pro SMTP 5.2.6) with ESMTP id 3070923 for lml@lancaironline.net; Mon, 11 Aug 2008 08:54:06 -0400 Received-SPF: pass receiver=logan.com; client-ip=207.115.11.54; envelope-from=donaldgordon@bellsouth.net Received: from blueskycomputer (adsl-154-144-172.mco.bellsouth.net[72.154.144.172]) by isp.att.net (frfwmhc04) with SMTP id <20080811125326H040096pj4e>; Mon, 11 Aug 2008 12:53:26 +0000 X-Originating-IP: [72.154.144.172] From: X-Original-To: "'Lancair Mailing List'" Subject: RE: [LML] Re: LNC2, O-320-E3D prop selection X-Original-Date: Mon, 11 Aug 2008 08:53:24 -0400 X-Original-Message-ID: <013a01c8fbb1$41548360$6401a8c0@BlueSkyComputer> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6838 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 Thread-Index: Acj6VyktYYkTQ5/4S2+UPuraSNmzoQBWOXcg In-Reply-To: Terrance, I have installed an electric, MT constant speed propeller. It is an MTV-18-C/170-119d model. I am very pleased with the performance of the propeller. I have plenty of ground clearance and the propeller was relatively easy to install. I'm not sure what configuration/planform information you a specifically looking for but it is a 3-blade propeller with 67" diameter blades. The unit weights 42 lbs including spinner and control unit. I'm not sure what tip thickness you want (chord width or actual thickness), but I'll measure it for you when I'm at the hangar = this weekend. I'll also snap a photo and send it to you as well. Don Gordon N320DS - LNC2 Orlando, FL 1300 Hours -----Original Message----- From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of terrence o'neill Sent: Saturday, August 09, 2008 3:35 PM To: lml@lancaironline.net Subject: [LML] Re: LNC2, O-320-E3D prop selection hi Don, I am choosing a prop and found your post from last November. I have = a=20 235/320 presently with a 64" wood prop... and am looking at the = elecctric=20 MTV-18-C/170-57. I have an O-320 B2b which I converted to injection.=20 Couldn't find this prop at OSH, and wondered if yours was one, and if = you=20 might have a e-photo of it I could look at... especially the blade=20 configuration/planform... and the blade thickness at the tip? Terrence. L235/320 N211AL From: To: "Lancair Mailing List" Sent: Wednesday, November 01, 2006 09:05 AM Subject: [LML] Re: LNC2, O-320-E3D prop selection > Tim, > I also have a MT 3 blade electric prop. My O-320 B1B narow deck would = not > accomodate a hydraulic actuator.. am satisfied with their = performance.=20 > Don Skeele A&P N320J >> -- For archives and unsub = http://mail.lancaironline.net:81/lists/lml/List.html