Mailing List lml@lancaironline.net Message #45234
From: Walter Atkinson <walter@advancedpilot.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] GAMI Injectors?
Date: Thu, 06 Dec 2007 14:40:30 -0500
To: <lml@lancaironline.net>
Erik:

**Just wondering if anyone as any experience....Pro/Con with the GAMI injector system.  I am running a Performance IO-550 in a Legacy.**

Well, I had GAMIjector set #3 about ten years ago.  They went to TBO and were sold with the airplane.


**Have noticed that the #6 cylinder is consistently running about 100 degrees hotter (leaner) EGT.  If not the GAMI injectors, is there any other way to bring the EGT's more in line, thus allowing more effective leaning possibilities? **

The hotter EGT does NOT mean that that cylinder is leaner.  Even RAW EGT temps re meaningless.  What you are looking for is for all of the cylinders to peak at the same FF, not at the same raw temperature.  Do a GAMI Lean Test, downloadable at <http://www.advancedpilot.com/assist.html>.


**Also, do the GAMI injectors tend to hold their setting or is it a constant process to keep them in line?**

They do not change unless they become clogged like any injector would. The last three sets I've had on engines did not change at all during the entire run.

Walter
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster