Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Sun, 11 Nov 2007 19:03:45 -0500
Message-ID: <redirect-2466757@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=206.46.252.40; envelope-from=sbej@verizon.net
From: Bryan Wullner <sbej@verizon.net>
Subject: Re: [LML] Re: Filling and Sanding
In-reply-to: <list-2465127@logan.com>
MIME-version: 1.0 (Apple Message framework v752.3)
Content-type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Content-transfer-encoding: 7bit
References: <list-2465127@logan.com>

Bill,

I am going to be using Interlux on my 360.  A good friend of mine in  
the boating industry is a rep for Interlux products and he is also a  
builder and flyer.  I will be using the Interfil filler for some  
areas on my project.  I am going to be using the Interprotect 2000E  
primer, rolled on,  for a rough fill primer on the main areas only.  
(not on control surfaces)  Then use the Interprotect 3000 for the  
final primer.   The Interfil 2000E can left of up to 3 months and  
still add putty over the top of it without sanding.  It has an  
excellent adhesion and water/UV barrier qualities.  Very easy to use  
and sand.
If you want to get in touch with him let me know I will fwd you his  
contact info so you can pick his brain.   He claims this stuff is  
better than WLS.    Everything I've heard from him leads me to  
believe this stuff is the way to go.  For me that is.


On Nov 10, 2007, at 8:49 AM, Bill Wade wrote:

>  Tim and others- do you have any opinion on polyurethane marine  
> paint systems such as Interlux? I have a dealer nearby and it seems  
> to me that boats are exposed to harsher UV, chemical and physical  
> conditions than a plane is likely to see.  Also, I ran across  
> silver Sharpies at Wal-Mart. They show up beautifully on carbon and  
> clean up with acetone.  -Bill Wade
>
>
>
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/ 
> List.html