Mailing List lml@lancaironline.net Message #44507
From: babyblue <grabiel@freeway.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] hot starts
Date: Sun, 21 Oct 2007 22:05:30 -0400
To: <lml@lancaironline.net>
Chat,
  For hot starts I just run the boost for about 3 or 4 seconds. Just enough to move the hot fuel vapors out of the line. Works all the time.
 
   Don G. 722B
 
   
----- Original Message -----
Sent: Saturday, October 20, 2007 5:59 PM
Subject: [LML] hot starts

Guys,

 

I apologize for asking a question that has been answered many times in the past, but I can’t get to the archives, and I have read most of the responses anyway.  I have about 150 hours on my ES with an IO550N.  I recently flew for about an hour and shut down and tried to restart about 30 minutes later.  I have read and used hot start procedures in the past with reasonably good results.  I pulled the mixture to shut off and ran the high boost for 90 seconds, pushed the mixture in and boosted for 2-3 seconds, then back to shut off, then cracked the throttle and tried to start.  After several attempts with no results, I had to let the plane sit for about 30 minutes before I could get it started.  What am I doing wrong?  Suggestions?

 

Chat Daniel  

Super ES N891AC


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.1/1079 - Release Date: 10/19/2007 5:10 AM
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster