|
|
The Lancair solution is a built in
problem. Attached are photos of my solution. There maybe some
questions about strength or adjustment, but otherwise the concept is
better.
John Herminghaus
LIV-P I-VVVV
TByrnes133@aol.com wrote:
Gentlemen
Our retractable step has been sticking for the last couple of
months, so we decided to rebuild it while we were doing the Annual
inspection. What we found was that the cable has sawed right thru the
stainless tube in the middle of the 180 degree bend. We have about 350
hours on the plane. Has any body else out there had this problem. We
made a new tube and will replace tomorrow. Any suggestions on keeping
it from happening again?
Tom Byrnes
Lancair IV N54TB
step1.jpg
step2.jpg
step4.jpg
|
|